V6 J-Head Hotend teljes készlet 10 db-os extruder nyomtatófejjel 5 db rozsdamentes S P4Q3

283418875186

Új termék

V6 J-Head Hotend Full Kit With 10Pcs Extruder Print Head 5Pcs Stainless S P4Q3

Compatible with all 1.75mm E3D V6 Makerbot 3D Printer
12V/40W heater, 12V 0.13A high speed fan with shroud, 19cm cable and NTC3950 pre-wired thermistor, can lose heat quickly
Nozzle and tube connect seamless, prevent material leaking and blocking
for both direct feed and bowden applications, good for ABS, PLA and other conventional print materials
Extruder Tube:
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 22.5mm
Filament Diameter: 1.75mm
Material: Stainless Steel
V6 Hotend Sets:
12V/40W NTC heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
1M long PTFE/teflon tubing(4mm OD 2mm ID)
Equipped with NTC3950 thermistors
PC4-01 Tube Fitting
Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Photo Color
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm
Note: Compatible with all 1.75mm E3D V6 Makerbot 3D printer.
Attention: Small parts, keep away from children
Package Contents:
1 x Extruder Kits
2 x 0.2mm Brass Nozzle
2 x 0.3mm Brass Nozzle
4 x 0.4mm Brass Nozzle
2 x 0.5mm Brass Nozzle
5 x 1.75mm Extruder Tube
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Bővebb leírás

-1 / 2 / Gyorsan Fogyó termék

1 260 Ft‎

-65%

3 599 Ft‎

Egyéb infó

V6 J-Head Hotend Full Kit With 10Pcs Extruder Print Head 5Pcs Stainless S P4Q3

Compatible with all 1.75mm E3D V6 Makerbot 3D Printer
12V/40W heater, 12V 0.13A high speed fan with shroud, 19cm cable and NTC3950 pre-wired thermistor, can lose heat quickly
Nozzle and tube connect seamless, prevent material leaking and blocking
for both direct feed and bowden applications, good for ABS, PLA and other conventional print materials
Extruder Tube:
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 22.5mm
Filament Diameter: 1.75mm
Material: Stainless Steel
V6 Hotend Sets:
12V/40W NTC heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
1M long PTFE/teflon tubing(4mm OD 2mm ID)
Equipped with NTC3950 thermistors
PC4-01 Tube Fitting
Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Photo Color
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm
Note: Compatible with all 1.75mm E3D V6 Makerbot 3D printer.
Attention: Small parts, keep away from children
Package Contents:
1 x Extruder Kits
2 x 0.2mm Brass Nozzle
2 x 0.3mm Brass Nozzle
4 x 0.4mm Brass Nozzle
2 x 0.5mm Brass Nozzle
5 x 1.75mm Extruder Tube
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

283418875186 - bestbuy (207)