4. típus - SARK-100 Mini60 HF Bluetooth Antennaelemző Meter1-60Mhz SARK100 Ham Ham Radio

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
SARK-100 Mini60 HF Bluetooth Antenna Analyzer Meter1-60Mhz SARK100 For Ham Radio
SARK-100 Mini60 HF ANT SWR Antenna Analyzer Meter 1-60 Mhz SARK100 For Ham Radio
Description:
Type 1This is a SWR Analyzer for ham hobbists.
Frequency Generation & Control: 1 - 60 Mhz
Source impedance: 50 Ohms
Stability: /- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output: Adjustable: 2.0 Volts pp (typ)
Power supply: Powerd by External: 12 to 15 Volts DC, 500mA
Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors: RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Applications:
Measure antenna electrical parameters: SWR, impedance (resistance
reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q
and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate
Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ? and ? wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Operation button definitions:
Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance
BAND: select band from any of the available bands: 160M to 6M
CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade
SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna
CAN(up): increase frequency and used to cancel operation for CONFIG menu
VAL(down): decrease frequency and used to validate operation for CONFIG menu
Package Included:1 x ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio HobbistType 2(With Bluetooth)
Mini size: 9.1*5.3*2.5cm
Weight:220kg
Support for Android 2.2 -4.0 or new version, supports 3--10 inch mobile phone and tablet,
Support windows via software
Bluetooth connection method:
1, the installation software Andrews
2 , press the SET button to open the talent PC link
3 Press the DOWN button to confirm dc plug in the Bluetooth antenna head
4 Open the Bluetooth phone paired with the day assigned for 1234
5 Open Android software click the link prompts the connection point of the scan is completed successfully
Automated antenna SWR analyzer
Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
Display 2x16 with optional backlight
Precision DDS signal generator (AD9851) used as signal source
Buzzer
Operation:
Manual control option displays SWR and complex impedance at selected frequencies
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
Battery operated for field use or use external 13.8V wall adaptor
Power saving modes
Multi-point calibration for better accuracy
Instrument Capabilities:
Measure antenna electrical parameters: SWR, impedance (resistance reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ¼ and ½ wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Soecifications:
Frequency Generation & Control:
1 - 60 Mhz
Source impedance: 50 Ohms
Stability: /- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:
SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
Adjustable: 2.0 Volts pp (typ)
External: 12 to 14 Volts DC, 500mA
RF Output:
Power supply: DC 12-14V
Controls:
Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Package Included:1PC*SARK-100 Mini60 HF ANT SWR Antenna Analyzer Meter 1-60 Mhz SARK100 FĂĽr Ham RadioType 3(No bluetooth)Hardware:
Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
Display 2x16 with optional backlight
Precision DDS signal generator (AD9851) used as signal source
USB port connects to PC for field-upgradeable software and uploading of real-time measurement data
Buzzer
Operation:
Manual control option displays SWR and complex impedance at selected frequencies
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
Power saving modes
Multi-point calibration for better accuracy
Instrument Capabilities:
Measure antenna electrical parameters: SWR, impedance (resistance reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ¼ and ½ wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Specifications:
Frequency Generation & Control:
1 - 60 Mhz
Source impedance: 50 Ohms
Stability: /- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:
SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output:
Adjustable: 2.0 Volts pp (typ)
Power supply:
External: 12 to 14 Volts DC, 500mA
Controls:
Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors:
RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Package Included:1 x Antenna Analyzer (as the picture)Type 4(This is an Short Wave Antenna Analyzer Meter Tester)Can test a standing wave, resistance, capacitance, etc
Can connect the computer to do the antenna and other graphic analysis
Test frequency: 1-60 m
Size: 90 mm * 82 mm * 30 mm (super light super mini)
Power supply: 12 v
Joint: Q9 head
Package Included:1xMR100 Shortwave Antenna Analyzer Meter Tester For Ham Radio DC 12V Q9 HeadPayment
Shipping
401390046565/3 - ali110 (281)