Szín: Mini F7 FC - IFlight BLITZ Mini F7 Flight Controller Stack OSD(AT7456E) BLITZ E55S 4-IN-1 ESC DShot150/300/600/MultiShot

Product Name: BLITZ Mini F7 Flight Controller
Top Features:
Improved circuit design, better components and lower electrical
noise!
DJI HD VTX Connector (Plug-and-Play / No soldering required)
FC indicator LEDs for visual debugging
 
Changelog:
2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to
availability & price issues with MPU6000.
 
Specifications:
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456
Flash: 16MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3
screws
Dimensions: 30.5x27 mm
Weight: 5g
 
Wiring suggestion:
UART 1 for VTX HD / Analog
UART 2 for a Receiver
UART 3/4/5 for GPS or other sensors that require a serial port
UART 6 for ESC Telemetry
 
Tips
1. F722 MCU has an inner inverter.
2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX，we
suggest you connect to Uart_RX2
3. Frsky SmartPort，Tramp & Smartaudio can be connected to any unused
UART_TX，we suggest you connect to Uart_TX1
4. F.port can be connected to any unused UART_TX，we suggest you connect to
Uart_TX2
 
Included Connectors (Plug-and-Play wire harness):
 
1x SH1.0 - 9pin connector for HD VTX/Analog VTX&CAM
（5V/BAT/G/VO/T1/R1/5V/G/VI）
1x SH1.0 - 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
1x SH1.0 - 6pin connector for any Receiver or DJI（3V3/R2i/5V/G/R2/T2）
1x SH1.0 - 4Pin connector GPS (T4/R4/G/5V)
1x SH1.0 - 4Pin connector LED & Beeper (BUZ/LED/G/5V)
 
BLITZ Mini E55S:
Dimension: 35*42mm
Mounting Holes: 20*20mm/Φ4mm
Weight: 11.3g
Supports 2-6S lipo input
MCU：BB21
Constant: 55 Amps
Burst: 60 Amps
Current sensor: Yes
BEC: No
Current rate: 100
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Target: QH-50 16.7