Szín: 5W fény nélkül - AOKoda 3 az 1-ben akkumulátor kiegyenlítő LCD feszültségjelző 5W 50W 150W akkumulátor kisütő

The Battery
Meter/Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can
measure battery voltage precisely and balance cell voltage in battery pack, or
discharging battery for long time storage.
The balance
function can be executed before / after battery charged. It also can be done
during process. It makes sure battery pack keeping in excellent
condition.
User could observe all cell voltage in whole battery pack at once.
It helps user to find out which cell is abnormal during charging or discharging
process.
 150W:
Outline
Dimension: 93.5 x 60 x 17 mm
Discharge power Max: 150W
Measureable battery
and amount:
Li-polymer / Li-Fe 2-6 cell
(standard voltage 7.4V - 25.2V
using divided voltage connector)
Receiver battery 1.2V - 12V DC
(Not limit
battery type, but need external power 7.4-25.2.1V, use JST connector)
Balance
voltage setting range(low limit):
2.0V-3.9V (pre-setting value
3.3V)
Discharge voltage setting range (lower limit):
3.0V - 4.2V
(pre-setting value 3.9V)
Note: do not
put two batteries! can only use one of the port one time. or leading to be
burned
Net weight: 156g
Color:
Blue
5W:
* use for Li-polymer / Li Fe
battery.
* use for 2s-6s battery pack.
* Can display battery cell voltage and total
voltage.
* Minimum cell voltage allow
balancing.
* Discharge target voltage for each
cell.
* Balance function.