Szín: 1db - 1/2/5db Flysky FS-X6B FS X6B 2.4G PPM i-BUS 6CH vevő Rc Quadcopterhez FS-I6X FS-i4 FS-i6 FS-i6S Adó

Fit for FS-i10,FS-i8,FS-i6,FS-i6s,FS-i6x,FS-i4,FS-i4x ect.FS series rc
transmitter.NOT INCLUDED THE REMOTE CONTROL
It is a 6 channel two-way receiver designed for multi-rotor aircraft
Use
the AFHDS 2A(Automatic Frequency Hopping Digital System) protocol and dual
omnidirectional antenna with superior noise reduction techniques.
The FS-X6B
supports 6 channel PWM output, standard PPM output and i-BUS support for up to
18 channels alongside a reliable voltage sensor
interface.
Specification:
Size: 37*22*7mm/1.4*0.9*0.3inches
Weight:
5g
Ports:
PWM signal port:GND, VCC. Outputs channels 1-6 PWM.
PPM
signal port: Outputs standard PPM signal.
I-BUS signal port: Outputs i-Bus
signal,up to 18 channels.
Voltage sensor port:External power sensor (1S-4S
connector) 0 to 18V.
Binding:
1. To prepare the transmitter for
binding information refer to your transmitter's user manual.
2. Power on the
receiver while holding the bind button. If the reciever's LED is flashing this
means it has entered bind mode. After the successfully binding, the transmitter
will automatically return to the previous menu. If binding is successful the
receiver's LED will stop flashing a remain solid.
3. Check if all the model
and receiver work as expected. If anything does not work as expected, restart
this procedure from the beginning.
Compatible Transmitters:
The FS-X6B
receiver is compatable with all AFHDS 2A Transmitters,for example
FS-i10,FS-i8,FS-i6,FS-i6S,FS-i6X,FS-i4,FS-i4X.