Kosár
1
Termék
Termék
203 Ft
(üres)
Nincs termék
To be determined
Szállítás
203 Ft
Összesen
Termék a kosaradba helyezve
Mennyiség
Összesen
1 termék a kosaradban.
1 termék a kosaradban.
Termék összesen
203 Ft
Szállítás összesen
To be determined
Összesen
203 Ft
Szelep-t__pusa_-Presta-szelep---2023-__j-ultrak__nny__-ker__kp__r-bels__-cs__-700-18_32C-orsz__g__ti-MTB-ker__kp__r-TPU
0148DIGITA003497
Új termék
This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage!
Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.
Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the inner tube is round; this
pressure should be less than 0.5 bar/8 PSI.
Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.
Every 3° (5°F) increase in temperature would increase the tire pressure by about 1% .
If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F), it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).
Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F), the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.
If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.
Product name: Ultra-light road bicycle inner tube
specification: 700×18/32C (recommended scope of application)
Material: Special TPU
Weight: 28g
Valve length: 65mm detachable valve, supports rim brakes/disc brakes.
Features: Small size, light weight, good toughness, cost-effective
Size : 700 x 18 23 25 28 30 32C Recommended scope of application
Material：Special TPU
Weight：28g
Valve length French 65mm
Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.
Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the inner tube is round; this
pressure should be less than 0.5 bar/8 PSI.
Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.
Every 3° (5°F) increase in temperature would increase the tire pressure by about 1% .
If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F), it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).
Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F), the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.
If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.
Product name: Ultra-light road bicycle inner tube
specification: 700×18/32C (recommended scope of application)
Material: Special TPU
Weight: 28g
Valve length: 65mm detachable valve, supports rim brakes/disc brakes.
Features: Small size, light weight, good toughness, cost-effective
Size : 700 x 18 23 25 28 30 32C Recommended scope of application
Material：Special TPU
Weight：28g
Valve length French 65mm
Egyéb infó
A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
2023 új ultrakönnyű kerékpár belső cső 700 18/32C országúti MTB kerékpár TPU gumiabroncs 700C 45/65/85mm hosszú francia szelep szuper könnyű cső
2023 New Ultralight Bike Inner Tube 700 18/32C Road MTB Bicycle TPU Tire 700C 45/65/85mm Length French Valve Super Light Tube
This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage!
Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.
Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the inner tube is round; this
pressure should be less than 0.5 bar/8 PSI.
Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.
Every 3° (5°F) increase in temperature would increase the tire pressure by about 1% .
If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F), it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).
Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F), the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.
If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.
Product name: Ultra-light road bicycle inner tube
specification: 700×18/32C (recommended scope of application)
Material: Special TPU
Weight: 28g
Valve length: 65mm detachable valve, supports rim brakes/disc brakes.
Features: Small size, light weight, good toughness, cost-effective
Size : 700 x 18 23 25 28 30 32C Recommended scope of application
Material：Special TPU
Weight：28g
Valve length French 65mm
0148DIGITA003497 - digitaling
2023 új ultrakönnyű kerékpár belső cső 700 18/32C országúti MTB kerékpár TPU gumiabroncs 700C 45/65/85mm hosszú francia szelep szuper könnyű cső
2023 New Ultralight Bike Inner Tube 700 18/32C Road MTB Bicycle TPU Tire 700C 45/65/85mm Length French Valve Super Light Tube
This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage!
Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.
Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the inner tube is round; this
pressure should be less than 0.5 bar/8 PSI.
Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.
Every 3° (5°F) increase in temperature would increase the tire pressure by about 1% .
If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F), it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).
Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F), the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.
If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.
Product name: Ultra-light road bicycle inner tube
specification: 700×18/32C (recommended scope of application)
Material: Special TPU
Weight: 28g
Valve length: 65mm detachable valve, supports rim brakes/disc brakes.
Features: Small size, light weight, good toughness, cost-effective
Size : 700 x 18 23 25 28 30 32C Recommended scope of application
Material：Special TPU
Weight：28g
Valve length French 65mm
0148DIGITA003497 - digitaling