Kosár
0
Termék
Termék
(üres)
Nincs termék
To be determined
Szállítás
0 Ft
Összesen
Termék a kosaradba helyezve
Mennyiség
Összesen
0 termék a kosaradban.
1 termék a kosaradban.
Termék összesen
Szállítás összesen
To be determined
Összesen
Relé kimenő LED digitális hőmérséklet-szabályozó termosztát inkubátor RW1820 Y4S4
283170393594
Új termék
Relay Output LED Digital Temperature Controller Thermostat Incubator RW1820 Y4S4
Product function brief introduction: The single circuit temperature controller can be set into the cooling temperature control or the heat control temperature control, using the RW1820 digital temperature sensor to measure the temperature, control the output of the relay. The control temperature range can reach -45 to 99 C, and it has the function of delay starting and closing display.
In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached. In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached. The temperature control and startup time are adjustable, and the temperature deviation correction function is also available.
The photo frame installation method has the advantages of convenient and fast installation.The isolated power supply can be used to ensure that the controller is stable, reliable and continuous when the power supply varies from 100V to 250VADC.
Remarks: 1.When the display is turned off, the related control part still works.2.No matter how long the delay start time is adjusted, only the last 20 seconds countdown is displayed at the upper limit.3.In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached.
4.In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached.5.Press the knob and turn on the power. All the parameters will be restored to the factory settings. When the"-" is displayed, the knob should be loosened.
Parameter
Size (mm): L96*W51*H25
Window size: L93*W48
The environment is: -10 C ~ 50 C
Display mode: three bit LED digital display
Input power supply: DC12V
Standby power: Less than 2W
Load power: re
Product function brief introduction: The single circuit temperature controller can be set into the cooling temperature control or the heat control temperature control, using the RW1820 digital temperature sensor to measure the temperature, control the output of the relay. The control temperature range can reach -45 to 99 C, and it has the function of delay starting and closing display.
In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached. In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached. The temperature control and startup time are adjustable, and the temperature deviation correction function is also available.
The photo frame installation method has the advantages of convenient and fast installation.The isolated power supply can be used to ensure that the controller is stable, reliable and continuous when the power supply varies from 100V to 250VADC.
Remarks: 1.When the display is turned off, the related control part still works.2.No matter how long the delay start time is adjusted, only the last 20 seconds countdown is displayed at the upper limit.3.In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached.
4.In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached.5.Press the knob and turn on the power. All the parameters will be restored to the factory settings. When the"-" is displayed, the knob should be loosened.
Parameter
Size (mm): L96*W51*H25
Window size: L93*W48
The environment is: -10 C ~ 50 C
Display mode: three bit LED digital display
Input power supply: DC12V
Standby power: Less than 2W
Load power: re
Egyéb infó
Relay Output LED Digital Temperature Controller Thermostat Incubator RW1820 Y4S4
Product function brief introduction: The single circuit temperature controller can be set into the cooling temperature control or the heat control temperature control, using the RW1820 digital temperature sensor to measure the temperature, control the output of the relay. The control temperature range can reach -45 to 99 C, and it has the function of delay starting and closing display.
In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached. In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached. The temperature control and startup time are adjustable, and the temperature deviation correction function is also available.
The photo frame installation method has the advantages of convenient and fast installation.The isolated power supply can be used to ensure that the controller is stable, reliable and continuous when the power supply varies from 100V to 250VADC.
Remarks: 1.When the display is turned off, the related control part still works.2.No matter how long the delay start time is adjusted, only the last 20 seconds countdown is displayed at the upper limit.3.In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached.
4.In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached.5.Press the knob and turn on the power. All the parameters will be restored to the factory settings. When the"-" is displayed, the knob should be loosened.
Parameter
Size (mm): L96*W51*H25
Window size: L93*W48
The environment is: -10 C ~ 50 C
Display mode: three bit LED digital display
Input power supply: DC12V
Standby power: Less than 2W
Load power: re
283170393594 - bestbuy (200)
Product function brief introduction: The single circuit temperature controller can be set into the cooling temperature control or the heat control temperature control, using the RW1820 digital temperature sensor to measure the temperature, control the output of the relay. The control temperature range can reach -45 to 99 C, and it has the function of delay starting and closing display.
In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached. In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached. The temperature control and startup time are adjustable, and the temperature deviation correction function is also available.
The photo frame installation method has the advantages of convenient and fast installation.The isolated power supply can be used to ensure that the controller is stable, reliable and continuous when the power supply varies from 100V to 250VADC.
Remarks: 1.When the display is turned off, the related control part still works.2.No matter how long the delay start time is adjusted, only the last 20 seconds countdown is displayed at the upper limit.3.In the refrigeration mode, when the temperature exceeds the lower limit, the output is turned on, and the output is stopped when the upper limit is reached.
4.In the heating mode, the output is opened when the temperature is less than the upper limit, and the output is stopped when the lower limit is reached.5.Press the knob and turn on the power. All the parameters will be restored to the factory settings. When the"-" is displayed, the knob should be loosened.
Parameter
Size (mm): L96*W51*H25
Window size: L93*W48
The environment is: -10 C ~ 50 C
Display mode: three bit LED digital display
Input power supply: DC12V
Standby power: Less than 2W
Load power: re
283170393594 - bestbuy (200)