Egyéb infó
Small 12864 LCD M328 digital Transistor Tester Capacitance ESR Meter Diode O4R1
Supply voltage:9V
Condition:New
Screen Size:40x60mm
Note: Products does not contain 9v battery!
Using ATmega8, ATmega168 or ATmega328 microcontroller.
2x16-character LCD display the results.
One button operation, auto power off.
Shutdown current is only 20nA, support for battery operation.
Low-cost version without the crystal, auto power off. 1.05k version of the software ATmega168 or ATmega328 in sleep mode when no measurement to reduce power consumption.
Automatic detection PNP and NPN type bipolar transistors, N, P-channel MOSFET, JFET, diode, a double diode, thyristor SCR.
Automatic detection pin layout.
Measuring current amplification factor of the bipolar transistor and the threshold voltage emitter junction.
Darlington transistor amplification factor can be identified by the high threshold voltage and high current.
For bipolar transistor, MOSFET protection diode testing.
Measuring the threshold voltage and the gate capacitance of the MOSFET.
Supports two resistance measurements and symbols show the highest four numbers and units. Both ends of the resistor symbol is shown connected to the tester probes number (1-3). Therefore, the potential can also be measured. If the potentiometer is adjusted to its end, the tester can not distinguish between the middle and the ends of the pin.
Resistance measurement resolution is 0.1 ohms, the highest measured value 50M ohms.
Can be detected and measured a capacitor. Maximum four numbers and units. Values can be from 25pf (8MHz clock, 50pF @ 1MHz clock) to 100mF.
Material: PCB
Package included :1 x Transistor Tester Capacitance
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
283000015075 - bestbuy (263)