Radarérzékelő 10m - Mikrohullámú radar érzékelő kapcsoló RCWL-0516 3-7m / 4-8m / 5-8m / 6-9m / 10m / 8-15m

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Microwave Radar Sensor Switch RCWL-0516 3-7m/4-8m/5-8m/6-9m/10m/8-15m
Microwave Radar Sensor Switch RCWL-0516 3-7m/4-8m/5-8m/6-9m/10m/8-15mApplication:1. Security2. Intelligent Lighting3. Body sensors toys4. Industrial automation and control5. Auto-sensing electrical equipment6. Battery-powered automatic control
Usage notice:1. It is better away from wall about 3-4 meter.against get sensor from another side of wall;
2. Open areas more responsiveRadar Sensor RCWL-0516Features:
1. transmission signal processing control chip RCWL-9196
2. wide operating voltage range: 4.0-28.0V
3. compared with the traditional infrared feeling PIR, with the penetrating detection capability
4. block time, distance adjustable
5. output 3.3V power supplyRadar Sensor 3-7m
Features:1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their echo.4. The sensors detect changes within echo.5. The sensors detect tiny movement in detect range.6. Send signal to MCU and execution instruction.7. Signals are likely to be detected through the door, glass and thin walls.8. It will get best probe result if person or object when moving toward the sensor.9. This product is a strong anti-jamming capability, almost without wind, heat and other environmental factors foreign interferenceParameter:1. working voltage: 3.3-20VDC;2. standby quiescent current: <3mA;3. transmit power: <2mW;4. the working environment temperature: -20℃~ 80℃;5. Trigger: Repeat Trigger (default);6. the output signal: TTL level; high->3.3V/Low->0V;7. detection angle: 360°(spherical) no dead ends;8. detection range: 3-7 meters, The default setting 7 meters.9. the working delay: 1 second to hundreds of seconds, the default setting 30S;10. It is use for 3-12W LED lamp11. Diameter:25mm
Radar Sensor 4-8m
Parameter:1. power supply voltage: 3.3-20VDC;2. the quiescent current: 4MA;3. module size: 23*33MM4. the transmission power: < 2mW;5. the output signal: TTL (3V/5V), repeat triggering6. sensing distance: 4-8 meters;7. detection angle: 180 degrees;8. the time delay: The default setting 20S/30S (adjustable).9,. Installation: housing supporting the installation/T8 split, integrated installation
Radar Sensor 4-8m 3-7WParameter:
1. Size:33*32mm
2. Contol power:3-7W
3. Input voltage:10-28VDC
4. Output current:240mA
5. Sensor angle:360degree
6. Delay:20-50s
7. Sensor distance:4-8meterRadar Sensor 5-8m
Parameter:1. input voltage: DC7-45V;2. detection angle: 360° (the actual installation is reduced);3. detection range: 5-8 meters, the default setting 7-8 meters (adjustable);4. the time delay is adjustable :20-30s;5. Use occasion:corridor, bathroom, basement, garage, warehouse
Radar Sensor 6-9mParameter:
1. working voltage: 3.3-20VDC;
2. standby quiescent current: <3mA;
3. transmit power: <2mW;
4. the working environment temperature: -20℃~ 80℃;
5. Trigger: Repeat Trigger (default);
6. the output signal: TTL level; high->3.3V/Low->0V;
7. detection angle: 360°(spherical) no dead ends;
8. detection range: 6-9 meters (when ordering optional). The default setting 8 meters;
9. the working delay: 1 second to hundreds of seconds, the default setting 30S.
Radar Sensor 10mParameter:
1. power supply voltage: 5VDC;
2. working current: <5MA;
3. module size: 18*16MM
4. the transmission power: < 2mW;
5. the output signal: TTL (>3V)
6. sensing distance: about 10 meters;
7. detection angle: 180 degrees;
8. the time delay: 10S-120S adjustable (default 30s)Radar Sensor 8-15mFeatures:
Operating Voltage:DC6-40V
Sensing Range: 8-15m
Rated Voltage: DC12V
Apply For:Induction lighting, corridor, hallway,garage, balcony, yard occasion, as energy-saving
switch or alarm device. This is mainly used in power with induction lamp T8 (garage induction lamp)
Size:31 x 17mm (two layer board)
Installation: wall installation, ceiling installation; T8 two built-in installation
Transmitting Power: <2mW
Load Power: can be used as a trigger to be required to install a relay. Maximum power 1000W
Detection Angle: 180°
Detecting Distance: 8-15m
Working Delay: Trigger output default time of 40s and 60s. Package Include: 1
202022153808/7 - ali110 (280)