L298N * 1 - TB6612FNG / L298N kettős motorvezérlő léptetőmotor-meghajtó modul F Arduino PIC AVR

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
TB6612FNG/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR
L298N #1
1. driver chip: L298N dual H-bridge driver chip
2. drive section terminal supply area VMS: 5V ~ 35V
3. drive section peak current Io: 2A / Bridge
4. logical part of the terminal supply area Vss :4.5-5.5V
5. logical part of the operating current range: 0 ~ 36mA
6. Control signal input voltage range: 4.5-5.5V is high level, 0V is low level
7. Maximum power consumption: 20W
8. Storage temperature: -25C ~ 130C
9. Driver Board Size: 55mm*60mm*30mm
10. Other functions: control direction indicator, power indicator, current sensing, logic portion plate to take power interface. Package Included: 1x L298N DC Motor Driver Module
L298N #2
100% band new and high quality
Using L298N made by ST company as the control chip, the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability.
Built-in 78M05,get power from drive power, however, when drive power over12V, please use the external 5v power as power supply.
Large capacity filter capacitance, afterflow protection diode, more stable and reliable.
Double H bridge drive
Chip L298N
Logical voltage 5V
Drive voltage 5V-35V
Logical current 0mA-36mA
Drive current 2A(MAX single bridge)
Storage temperature -20℃ to 135℃
Max power 25W
Size: 55x50x27mm
Package Contents:1 x Double H bridge drive
L298N #3L298N as main chip, ST corporation production.
Low heat,outstanding anti-interference performance.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W
Size:43 x 43 x 26mm
Net weight: 26g
Package weight:36g
Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to 5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4Package Included1 x 25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module
L298N #4
L298N as main chip, ST corporation production.
Low heat,outstanding anti-interference performance.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W
Size:43 x 43 x 26mm
Net weight: 26g
Package weight:36g
Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to 5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Package Included:1 x Dual H Bridge DC Stepper Motor Drive Controller Board Module Arduino L298N
TB6612FNG(Blue)
â… ,Characteristic1).TB6612FNG used in the design is a new drive device can independently controltwo bidirectional DC motor, it has a high level of integration, while providing sufficientoutput capability, operating performance and energy consumption also has advantages,so the integration miniaturization of the motor control system, it can be ideal as a motor driving device.
2).It has a high current MOSFET-H-bridge, dual circuit outputs can drive two motors.3).TB6612FNG highest output per channel 1.2 A continuous drive current,peak current start up 2A/3.2 A (continuous pulse / single pulse);4 kinds of motor control modes: Forward / Reverse / Brake / Stop;PWM supports frequencies up to 100 kHz; standby mode;chip low-voltage detection circuit and thermal shutdown protection circuit;working temperature: -20 ~ 85 ℃; SSOP24 small SMD package.
â…ˇ,ApplicationsConstitute use TB6612FNG and DC motor control unit MCU and its applicationin the wheeled mobile robot system in the differential drive. Test runs showedthat this combination of devices and SCM applications to achieve a stable andflexible motor drive control. TB6612FNG achieve in terms of integration,performance and output capability to run a better balance for single,dual DC motor design and development of a digital control system.
â…˘,Parameters
Supply voltage (VCC): 5V
Motor supply voltage (VM): 5V ~ 13.5V
Interface:
AIN1、AIN2 Channel A input
AO1、AO2 Channel A Output
BIN1、BIN2 Channel B input
BO1、BO2 Channel B Output
By controlling Arduino AIN1, AIN2 or BIN1, BIN2 different levels to achieve different combinations of functions.
Motor speed is controlled by PWM.
â…¦,Precautions
Input voltage must not be greater than 13.5V, otherwise there might be damage to the circuit.
Package included1x Replce L298N Dual Motor Driver Module Motor Controls TB6612FNG Arduino STM32 ARMTB6612FNG(Red)
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Features:Power supply voltage: VM=15V max, VCC=2.7-5.5VOutput current: Iout=1.2A(average) / 3.2A (peak)Standby control to save powerCW/CCW/short brake/stop motor control modesBuilt-in thermal shutdown circuit and low voltage detecting circuitAll pins of the TB6612FNG broken out to 0.1" spaced pinsFiltering capacitors on both supply linesPackage:1 x Dual TB6612FNG DC Stepper Motor Drive Controller Boar
401258534513/1 - ali110 (280)