ESP32-CAM modul - ESP32-CAM ESP32 WIFI Bluetooth Fejlesztési panel OV2640 Kamera 2.0 MP Modul

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
ESP32-CAM ESP32 WIFI Bluetooth Development Board OV2640 Camera 2.0 MP Module
ESP32-CAM ModuleFeatures:
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.

Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Included:
1 x ESP32-CAM ESP32 5V OV2640 Camera Module WIFI Bluetooth Development Board
OV2640 Camera 2MPFeature:
The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.Specification:
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20ÎĽA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 ÎĽm x 2.2 ÎĽm
Dark current: 15 mV/s at 60°CPackage Included:
1 x OV2640 2.0 MP 1/4'' Mega Pixels CMOS Image Sensor SCCB Interface Camera Module
202655204585/1 - ali110 (281)