Kosár
0
Termék
Termék
(üres)
Nincs termék
To be determined
Szállítás
0 Ft
Összesen
Termék a kosaradba helyezve
Mennyiség
Összesen
0 termék a kosaradban.
1 termék a kosaradban.
Termék összesen
Szállítás összesen
To be determined
Összesen
6X (RM660 digitális bevonat vastagságmérő 0,02 mm felbontású festék bevonatú Me J1N7
283476566971
Új termék
6X(RM660 Digital Coating Thickness Gauge 0.02mm Resolution Paint Coating Me J1N7
6X(Feature:
1. Matrix metal properties:
For the magnetic method, the magnetic properties and surface roughness of the base metal of the standard film should be similar to the magnetic and surface roughness of the matrix metal.
For eddy current method, the electrical properties of the base metal of standard film should be similar to the electrical properties of the substrate metal.
2. Thickness of matrix metal:
Check whether the thickness of the base metal exceeds the critical thickness. If not, it can be calibrated by the description method in the precautions.
3. Edge effect:
Measurements should not be carried out near the point of mutation near the specimen, such as edge, hole and inner corner.
4. Curvature:
It should not be measured on the curved surface of the specimen.
5. Number of readings:
Usually, because each reading of the instrument is not exactly the same, several readings must be taken in each measurement area. The local difference in the thickness of the overlay also requires repeated measurements in any given area.
6. Surface cleanliness:
Before testing, remove any adhesion material on the surface, such as dust, grease and corrosion products, but do not remove any covering material.
Specification:
Object of investigation: thickness of non-metallic coating on the surface of metal substrate (metal paint is not measured)
Detection capability: non-metallic coating on 0~1.25mm metal surface
Measurement accuracy: 2% RDG /- 0.02mm (2% RDG /- 1mil) (only steel and aluminum).
Power supply: 3V 1xCR2032 button battery(Not included)
Working current: Less than 10mA
Automatic shutdown time: leaving the tested object, no operation for 1 minutes.
Minimum diameter of matrix: 10mm
Critical thickness of matrix: 0.5mm
Display resolution: 0.02mm/1mil
Working environment temperature: -5â„~ 40â„
Working environment humidity: 5% ~95% RH non condensation
)
6X(Feature:
1. Matrix metal properties:
For the magnetic method, the magnetic properties and surface roughness of the base metal of the standard film should be similar to the magnetic and surface roughness of the matrix metal.
For eddy current method, the electrical properties of the base metal of standard film should be similar to the electrical properties of the substrate metal.
2. Thickness of matrix metal:
Check whether the thickness of the base metal exceeds the critical thickness. If not, it can be calibrated by the description method in the precautions.
3. Edge effect:
Measurements should not be carried out near the point of mutation near the specimen, such as edge, hole and inner corner.
4. Curvature:
It should not be measured on the curved surface of the specimen.
5. Number of readings:
Usually, because each reading of the instrument is not exactly the same, several readings must be taken in each measurement area. The local difference in the thickness of the overlay also requires repeated measurements in any given area.
6. Surface cleanliness:
Before testing, remove any adhesion material on the surface, such as dust, grease and corrosion products, but do not remove any covering material.
Specification:
Object of investigation: thickness of non-metallic coating on the surface of metal substrate (metal paint is not measured)
Detection capability: non-metallic coating on 0~1.25mm metal surface
Measurement accuracy: 2% RDG /- 0.02mm (2% RDG /- 1mil) (only steel and aluminum).
Power supply: 3V 1xCR2032 button battery(Not included)
Working current: Less than 10mA
Automatic shutdown time: leaving the tested object, no operation for 1 minutes.
Minimum diameter of matrix: 10mm
Critical thickness of matrix: 0.5mm
Display resolution: 0.02mm/1mil
Working environment temperature: -5â„~ 40â„
Working environment humidity: 5% ~95% RH non condensation
)
Egyéb infó
6X(RM660 Digital Coating Thickness Gauge 0.02mm Resolution Paint Coating Me J1N7
6X(Feature:
1. Matrix metal properties:
For the magnetic method, the magnetic properties and surface roughness of the base metal of the standard film should be similar to the magnetic and surface roughness of the matrix metal.
For eddy current method, the electrical properties of the base metal of standard film should be similar to the electrical properties of the substrate metal.
2. Thickness of matrix metal:
Check whether the thickness of the base metal exceeds the critical thickness. If not, it can be calibrated by the description method in the precautions.
3. Edge effect:
Measurements should not be carried out near the point of mutation near the specimen, such as edge, hole and inner corner.
4. Curvature:
It should not be measured on the curved surface of the specimen.
5. Number of readings:
Usually, because each reading of the instrument is not exactly the same, several readings must be taken in each measurement area. The local difference in the thickness of the overlay also requires repeated measurements in any given area.
6. Surface cleanliness:
Before testing, remove any adhesion material on the surface, such as dust, grease and corrosion products, but do not remove any covering material.
Specification:
Object of investigation: thickness of non-metallic coating on the surface of metal substrate (metal paint is not measured)
Detection capability: non-metallic coating on 0~1.25mm metal surface
Measurement accuracy: 2% RDG /- 0.02mm (2% RDG /- 1mil) (only steel and aluminum).
Power supply: 3V 1xCR2032 button battery(Not included)
Working current: Less than 10mA
Automatic shutdown time: leaving the tested object, no operation for 1 minutes.
Minimum diameter of matrix: 10mm
Critical thickness of matrix: 0.5mm
Display resolution: 0.02mm/1mil
Working environment temperature: -5â„~ 40â„
Working environment humidity: 5% ~95% RH non condensation
)
283476566971 - bestbuy (263)
6X(Feature:
1. Matrix metal properties:
For the magnetic method, the magnetic properties and surface roughness of the base metal of the standard film should be similar to the magnetic and surface roughness of the matrix metal.
For eddy current method, the electrical properties of the base metal of standard film should be similar to the electrical properties of the substrate metal.
2. Thickness of matrix metal:
Check whether the thickness of the base metal exceeds the critical thickness. If not, it can be calibrated by the description method in the precautions.
3. Edge effect:
Measurements should not be carried out near the point of mutation near the specimen, such as edge, hole and inner corner.
4. Curvature:
It should not be measured on the curved surface of the specimen.
5. Number of readings:
Usually, because each reading of the instrument is not exactly the same, several readings must be taken in each measurement area. The local difference in the thickness of the overlay also requires repeated measurements in any given area.
6. Surface cleanliness:
Before testing, remove any adhesion material on the surface, such as dust, grease and corrosion products, but do not remove any covering material.
Specification:
Object of investigation: thickness of non-metallic coating on the surface of metal substrate (metal paint is not measured)
Detection capability: non-metallic coating on 0~1.25mm metal surface
Measurement accuracy: 2% RDG /- 0.02mm (2% RDG /- 1mil) (only steel and aluminum).
Power supply: 3V 1xCR2032 button battery(Not included)
Working current: Less than 10mA
Automatic shutdown time: leaving the tested object, no operation for 1 minutes.
Minimum diameter of matrix: 10mm
Critical thickness of matrix: 0.5mm
Display resolution: 0.02mm/1mil
Working environment temperature: -5â„~ 40â„
Working environment humidity: 5% ~95% RH non condensation
)
283476566971 - bestbuy (263)