Kosár
0
Termék
Termék
(üres)
Nincs termék
To be determined
Szállítás
0 Ft
Összesen
Termék a kosaradba helyezve
Mennyiség
Összesen
0 termék a kosaradban.
1 termék a kosaradban.
Termék összesen
Szállítás összesen
To be determined
Összesen
2X (DSO328 2,4 hüvelykes TFT digitális LCD oszcilloszkóp, STM32 200KHz, X8I M8T7 szonda)
283478514509
Új termék
2X(DSO328 2.4 inch TFT Digital LCD Oscilloscope STM32 200KHz with Probe X8I M8T7
2X(This DSO328 digital mini oscilloscope adopts STM32 chip, ARM Cortex-M3 processor and with 2.4-inch TFT screen. It`s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Adopt ARM Cortex-M3 processor (STM32), and include a 2.4-inch color TFT display screen.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers. Come with instructions, easy to install and operate. Upgrade version of DSO311 and the test performance is more stable. With Auto/Normal/Single trigger modes, easy to captures the moment waveform.
Available rising or falling edge trigger and it runs faster than DSO138 & a good handle of data. Observable previous waveform before trigger(negative delay). Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function with cool black case, which makes it convenient to use in teaching and testing. The SMD has been soldered, more suitable for electronic beginner.
Color: Color as shown
Material: PCB FR-4
Type: Assembled Finished Product
Display: 2.4 inch TFT Color Display
Model: DSO328
Input impedance: 1MOhm
Analog Bandwidth: 0-200KHz
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Maximum Real-time Sampling Rate: 1Msps
Comes 1Hz /3.3V square wave test signal source.
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Vertical Sensitivity Range: 5mV/Div - 20V/Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions. )
2X(This DSO328 digital mini oscilloscope adopts STM32 chip, ARM Cortex-M3 processor and with 2.4-inch TFT screen. It`s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Adopt ARM Cortex-M3 processor (STM32), and include a 2.4-inch color TFT display screen.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers. Come with instructions, easy to install and operate. Upgrade version of DSO311 and the test performance is more stable. With Auto/Normal/Single trigger modes, easy to captures the moment waveform.
Available rising or falling edge trigger and it runs faster than DSO138 & a good handle of data. Observable previous waveform before trigger(negative delay). Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function with cool black case, which makes it convenient to use in teaching and testing. The SMD has been soldered, more suitable for electronic beginner.
Color: Color as shown
Material: PCB FR-4
Type: Assembled Finished Product
Display: 2.4 inch TFT Color Display
Model: DSO328
Input impedance: 1MOhm
Analog Bandwidth: 0-200KHz
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Maximum Real-time Sampling Rate: 1Msps
Comes 1Hz /3.3V square wave test signal source.
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Vertical Sensitivity Range: 5mV/Div - 20V/Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions. )
Egyéb infó
2X(DSO328 2.4 inch TFT Digital LCD Oscilloscope STM32 200KHz with Probe X8I M8T7
2X(This DSO328 digital mini oscilloscope adopts STM32 chip, ARM Cortex-M3 processor and with 2.4-inch TFT screen. It`s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Adopt ARM Cortex-M3 processor (STM32), and include a 2.4-inch color TFT display screen.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers. Come with instructions, easy to install and operate. Upgrade version of DSO311 and the test performance is more stable. With Auto/Normal/Single trigger modes, easy to captures the moment waveform.
Available rising or falling edge trigger and it runs faster than DSO138 & a good handle of data. Observable previous waveform before trigger(negative delay). Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function with cool black case, which makes it convenient to use in teaching and testing. The SMD has been soldered, more suitable for electronic beginner.
Color: Color as shown
Material: PCB FR-4
Type: Assembled Finished Product
Display: 2.4 inch TFT Color Display
Model: DSO328
Input impedance: 1MOhm
Analog Bandwidth: 0-200KHz
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Maximum Real-time Sampling Rate: 1Msps
Comes 1Hz /3.3V square wave test signal source.
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Vertical Sensitivity Range: 5mV/Div - 20V/Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions. )
283478514509 - bestbuy (263)
2X(This DSO328 digital mini oscilloscope adopts STM32 chip, ARM Cortex-M3 processor and with 2.4-inch TFT screen. It`s easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Adopt ARM Cortex-M3 processor (STM32), and include a 2.4-inch color TFT display screen.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers. Come with instructions, easy to install and operate. Upgrade version of DSO311 and the test performance is more stable. With Auto/Normal/Single trigger modes, easy to captures the moment waveform.
Available rising or falling edge trigger and it runs faster than DSO138 & a good handle of data. Observable previous waveform before trigger(negative delay). Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function with cool black case, which makes it convenient to use in teaching and testing. The SMD has been soldered, more suitable for electronic beginner.
Color: Color as shown
Material: PCB FR-4
Type: Assembled Finished Product
Display: 2.4 inch TFT Color Display
Model: DSO328
Input impedance: 1MOhm
Analog Bandwidth: 0-200KHz
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Maximum Real-time Sampling Rate: 1Msps
Comes 1Hz /3.3V square wave test signal source.
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Vertical Sensitivity Range: 5mV/Div - 20V/Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions. )
283478514509 - bestbuy (263)