Kosár
13
Termék
Termék
26 098 Ft
(üres)
Nincs termék
To be determined
Szállítás
26 098 Ft
Összesen
Termék a kosaradba helyezve
Mennyiség
Összesen
13 termék a kosaradban.
1 termék a kosaradban.
Termék összesen
26 098 Ft
Szállítás összesen
To be determined
Összesen
26 098 Ft
1X (Vulkán-szilikon V2 melegítő blokk szilikon szigetelő zokni a PT100 sili R1J1-hez
283472057757
Új termék
1X(Volcano silicone V2 heater block silicone insulation sock for PT100 sili R1J1
1X(These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
Socks don`t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100 print hours. With less sticky materials like ABS and gentler use you can get almost infinite life.
colour:black
Material:Silica gel
size:24*20*11.5mm
Package Contents:
1 * Silicone Cover)
1X(These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
Socks don`t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100 print hours. With less sticky materials like ABS and gentler use you can get almost infinite life.
colour:black
Material:Silica gel
size:24*20*11.5mm
Package Contents:
1 * Silicone Cover)
-3
/
3
/ Gyorsan Fogyó termék
3
/ Gyorsan Fogyó termék
Egyéb infó
1X(Volcano silicone V2 heater block silicone insulation sock for PT100 sili R1J1
1X(These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
Socks don`t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100 print hours. With less sticky materials like ABS and gentler use you can get almost infinite life.
colour:black
Material:Silica gel
size:24*20*11.5mm
Package Contents:
1 * Silicone Cover)
283472057757 - bestbuy (200)
1X(These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
Socks don`t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100 print hours. With less sticky materials like ABS and gentler use you can get almost infinite life.
colour:black
Material:Silica gel
size:24*20*11.5mm
Package Contents:
1 * Silicone Cover)
283472057757 - bestbuy (200)