> >>3X (9,2 hüvelyk x 9,2 hüvelykes Ender-3 nyomtató rész varázslat) A mágneses felület P4A1 legyen
Alacsonyabb ár! 3X (9,2 hüvelyk x 9,2 hüvelykes Ender-3 nyomtató rész varázslat) A mágneses felület P4A1 legyen Nagyobb
Előző Következő

3X (9,2 hüvelyk x 9,2 hüvelykes Ender-3 nyomtató rész varázslat) A mágneses felület P4A1 legyen

283308650647

Új termék

3X(9.2 inch x 9.2 inch Ender-3 printer part magic Magnetic build surface be P4A1

Item Type:Glass Plate
Model Number:Carbon Silicon Crystal Build Hotbed Platform
2018 Upgrade 3D Printer Heatbed Platform: can install on a heated bed and glass platform, work well for Ender 2/ 3 etc.
2 in 1 Build Sheet: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is not suitable for ABS . if set heated beyond 80 degree, it `s magnetism will be weaker.
Reuse, easy remove;
Separation type bending to take the model. It`s more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !
colour:black
Material:plastic
Size: 235x235mm/ 9.2x9.2 inch
Package Contents:
1 * Magnetic sticker

Bővebb leírás

0 / 2 / Gyorsan Fogyó termék

4 969 Ft‎

-57%

11 557 Ft‎

Hozzáadás a kívánságlistához

Egyéb infó

3X(9.2 inch x 9.2 inch Ender-3 printer part magic Magnetic build surface be P4A1

Item Type:Glass Plate
Model Number:Carbon Silicon Crystal Build Hotbed Platform
2018 Upgrade 3D Printer Heatbed Platform: can install on a heated bed and glass platform, work well for Ender 2/ 3 etc.
2 in 1 Build Sheet: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is not suitable for ABS . if set heated beyond 80 degree, it `s magnetism will be weaker.
Reuse, easy remove;
Separation type bending to take the model. It`s more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !
colour:black
Material:plastic
Size: 235x235mm/ 9.2x9.2 inch
Package Contents:
1 * Magnetic sticker

283308650647 - bestbuy (215)

30 egyéb termék a kategóriából: