klace length: 30(First...
10PCS L9110 H-bridge Stepper Motor Dual DC motor Driver Controller Boardonboard two the L9110S motor control chipthe module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorthe module input voltage :2.5-12Vthe 800mA continuous current output capability per channel1. Low static work current2. Power supply voltage: DC2.5-12V3. Each...
DC12V XH-M452 Red Blue LED Display Thermostat Temperature Humidity ControllerSpecifications: Power supply: DC 12 V Temperature measurement range: -40 to 120â„ (-40 to 248°F) Humidity range: 0~100% RH Control precision: 0.1â„, 0.1% RH Test probe: Integrated sensor Output: 10A delay Dimensions: 65 x 55 x 28 mm Temperature control: 1) Set...
DC 12V XH-M452 Dual LED Thermostat Temperature Humidity Hygrometer ControllerSpecifications: Power supply: DC 12 V Temperature measurement range: -40 to 120â„ (-40 to 248°F) Humidity range: 0~100% RH Control precision: 0.1â„, 0.1% RH Test probe: Integrated sensor Output: 10A delay Dimensions: 65 x 55 x 28 mm Temperature control:1) Set the...
10PCS Easy Driver Shield stepping Stepper Motor Driver V44 A3967 For Arduino Specification:The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any...
Package Included:lr Dip-20 2Pcs ST CHIP IC L297 Stepper Motor Ctrlr Dip-20
Package Included:lr Dip-20 5Pcs ST CHIP IC L297 Stepper Motor Ctrlr Dip-20
HomeerChipsL9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver ICL9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver ICPackage Included : 1 x L9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver IC L9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver IC
RF/VHF/UHF Transistor MOTOROLA/RCA TO-39 2N5109N5109N5109Package Included:1PCS * RF/VHF/UHF Transistor MOTOROLA/RCA TO-39 2N5109 RF/VHF/UHF Transistor MOTOROLA/RCA TO-39 2N5109
HomeerChips2PCS L9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver ICL9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver ICPackage Included : 2 x L9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver IC 2PCS L9110H LG DIP-8 Full-bridge Driver H Dridge Driver Motor Driver IC
Condition : Brand New />SOP : 28Package Included:1 x SMD IC DRV8825 DRV8825PWPR stepper motor driver Chip Sop-28 FOR Arduino SMD IC DRV8825 DRV8825PWPR stepper motor driver Chip Sop-28 FOR Arduino
Low RDS (ON) outputsection / selectionMixed with slow current decay modesSynchronous rectification for low power dissipationInternal UVLOCrossover-current protection3.3 and 5 V compatible logic supplyThermal shutdown circuitryGround Fault CircuitLoad short-circuit protectionOf five optional step mode: full, 1/2, 1/4, 1/8 and 1/16The use chip: original...
Name:612 motor8mmwork voltage:3VRated:9500rpm/minApplication:used to connect to the main shaft gear and propeller, model cars, model aircraft.Package Included : 1 x DC Hobby Motor Gear motor Toy Motor DC Hollow Motor High Speed Type 612 Robotic DC Hobby Motor Gear motor Toy Motor DC Hollow Motor High Speed Type 612 Robotic
onboard two the L9110S motor control chipbr />br />the module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorthe module input voltage :2.5-12Vthe 800mA continuous current output capability per channel1. Low static work current2. Power supply voltage: DC2.5-12V3. Each channel has 800mA continuous current output4. Low...
Name:716 motorApplication:used to connect to the main shaft gear and propeller, model cars, model aircraftPackage Included : 1 x DC Hobby Motor Gear motor Toy Motor DC Hollow Motor Type 716 for Robotic DC Hobby Motor Gear motor Toy Motor DC Hollow Motor Type 716 for Robotic
motor drive module is ideal for use in battery-powered smart car, toy cars, robots. Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. Each can provide continuous current of 1.5A, peak current up to 2.5A, thermal protection and...
1. onboard Two PCS HG7881 motor controller chip chip chip2. module can drive 2 DC motors simultaneously, or one 4-wire 2-phase stepping motor3. module input voltage: 2.5-12V4. has a continuous current of 800mA per channel output capacity5. PCB size: 29.2 (mm) x23 (mm)Document for Download : Download Package Included:2PCS*H-bridge Stepper Motor Dual DC...
Features: DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY...
s:ed:2PCS L298N ZIP-15 ST DUAL FULL BRIDGE MOTOR DRIVER ICOn Apr-22-16 at 02:44:18 PDT, . 2PCS L298N ZIP-15 ST DUAL FULL BRIDGE MOTOR DRIVER IC
A3977 A3977SED A3977SEDT Microstepping DMOS Motor DriverS Motor DriverS Motor DriverPackage Included:1 x A3977 A3977SED A3977SEDT Microstepping DMOS Motor Driver A3977 A3977SED A3977SEDT Microstepping DMOS Motor Driver
3.7V Hobby Motor Type 720 Micro Motor DC Hollow Motor High speedollow Motor High speedollow Motor High speedPackage Included : 1 x 3.7V Hobby Motor Type 720 Micro Motor DC Hollow Motor High speed 3.7V Hobby Motor Type 720 Micro Motor DC Hollow Motor High speed
Features:le comes with its own four HG7881 chip.Can drive 4 DC motors, or two 4-wire 2-phase stepping motor.Specifications: Module supply voltage: 2.5-12VSuitable for the motor range: motor operating voltage 2.5V-12V0.8A maximum operating currentSize: 49mm x 36mmColor: BluePackage Incldued: 1 x HG7881 4-Channel DC Stepper Motor Driver Controller Board...
Brand new and high quality. />Voltage: 5V.Step angle: 5.625 x 1/64.Reduction ratio: 1/64.5 lines cable 4 phase stepper motor can be driven by ULN2003 chip.It also can be connected as 2 phase to useOriginal box: NoColor: SilverItem size: 31*27*19mmNet weight: 35gPackage Included:2 x 5V Stepper Motor 28BYJ-48 2PCS 28BYJ-48 Valve Gear Stepper Motor DC 5V...
Condition : Brand New />SOP : 28Package Included:2 x SMD IC DRV8825 DRV8825PWPR stepper motor driver Chip Sop-28 FOR Arduino 2pcs SMD IC DRV8825 DRV8825PWPR stepper motor driver Chip Sop-28 FOR Arduino
Specification:ent100 MA100MA120MAReduction rate48:1RPM (With tire)100190240Tire Diameter66mmCar Speed(M/minute)203948Motor Weight (g)50Motor Size70mm*22mm*18mmNoise<65dBTire Parameter Center hole: 5.3MM x 3.66MM Wheel size: 65x26mmPackage Included:1xsmart Car Robot Plastic Tire Wheel 1x DC Gear Motor arduino smart Car Robot Plastic Tire Wheel with DC...
an use 28BYJ-48 5V Stepper motor.1.Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please...
This product is a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protectionro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protectionro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection2PCS A4988 Driver Module StepStick Stepper Motor Driver For Reprap 3D...
Brand new and high quality. />Voltage: 12V.Step angle: 5.625 x 1/64.Reduction ratio: 1/64.5 lines cable 4 phase stepper motor can be driven by ULN2003 chip.It also can be connected as 2 phase to useOriginal box: NoColor: SilverItem size: 31*27*19mmNet weight: 35gPackage Included:2 x 28BYJ-48 Valve Gear Stepper Motor DC 12V 4 Phase Step Motor Arduino...
OPERATIONAL AMPLIFIERS IC TI/MOTOROLA DIP-14 LM3900N LM3900NE4 NEW14 LM3900N LM3900NE4 NEW14 LM3900N LM3900NE4 NEWPackage Included:10 x OPERATIONAL AMPLIFIERS IC TI/MOTOROLA DIP-14 LM3900N LM3900NE4 NEW 10PCS OPERATIONAL AMPLIFIERS IC TI/MOTOROLA LM3900N LM3900NE4 DIP-14
The use chip: original A4988 chipintroductionA4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or...
Features:n is a new drive device can independently control two bidirectional DC motor, it has a high level of integration, while providing sufficient output capability, operating performance and energy consumption also has advantages, so the integration miniaturization of the motor control system, it can be ideal as a motor driving device.2).It has a high...
Specification:2VMaterial: MetalModel: N20Revolving Speed: 600RPMTotal Length: 36mmMotor Size: 12mm(diameter)*26mm(height)Shaft Size: 3mm(diameter)*10mm(length)Package:1 X Motor DC12V 600RPM Micro Speed Reduction Gear Motor Metal Gearbox Wheel Shaft
HomeerChips2PCS MC6840P 6840P Motorola DIP28 Programmable Timer Module IC NEWMC6840P 6840P Motorola DIP28 Programmable Timer Module IC NEW Package Included:2PCS MC6840P 6840P Motorola DIP28 Programmable Timer Module IC NEW 2PCS MC6840P 6840P Motorola DIP28 Programmable Timer Module IC NEW
Allegro A3977 A3977SLPT MOTOR DRVR PWM DUAL 28TSSOP L 28TSSOP L 28TSSOP Package Included:1 x Allegro A3977 A3977SLPT MOTOR DRVR PWM DUAL 28TSSOP Allegro A3977 A3977SLPT MOTOR DRVR PWM DUAL 28TSSOP
Specification:tor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or...
100% brand new and high qualitye, speed control with ZhuanPei mounting holes, screw compatible steering gear steering wheel control high quality, high efficiency.Can easily blow out 20 cm away lighter flame can be used for fire fighting robots, robot for design and developmentWorking voltage: 5vBoard size:...
Low RDS (ON) outputsection / selectionMixed with slow current decay modesSynchronous rectification for low power dissipationInternal UVLOCrossover-current protection3.3 and 5 V compatible logic supplyThermal shutdown circuitryGround Fault CircuitLoad short-circuit protectionOf five optional step mode: full, 1/2, 1/4, 1/8 and 1/16The use chip: original...
100% Brand new and high quality driver board have the same VIN with Arduino,Onboard LED to indicate the drive direction and speedAll drivers junction have a counter electromotive force protection diode.Ardumoto is a motor driver board is based on the L298P H-bridge chips.It can control two DC motors.Ardumoto each drive currents up to 2A.Mainly used to...
A3977 A3977SED A3977SEDT Microstepping DMOS Motor DriverS Motor DriverS Motor DriverPackage Included:2 x A3977 A3977SED A3977SEDT Microstepping DMOS Motor Driver 2Pcs A3977 A3977SED A3977SEDT Microstepping DMOS Motor Driver
L298N as main chip, ST corporation production.ion.ion.Low heat,outstanding anti-interference performance.High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.Built-in 78M05,get power from drive power,however, when drive power...
1.If jumper is hit the position of ON DP,br />br /> that means 16 segment (4988) or 32 segment (8825) Jm connected motor2.Jv connect 5v and 12v-24v power supply3.Jc E, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal outputNotice:Pay attention to when installation direction,otherwise it may burn drive...
New L293D motor shield, the input voltage DC4.5-25VDC4.5-25VDC4.5-25V600mA OUTPUT CURRENT CAPABILITY PER CHANNEL1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNELENABLE FACILITYOVERTEMPERATURE PROTECTIONLOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY)INTERNAL CLAMP DIODESThe Device is a mnolithic integrated high voltage,high current four...
1. onboard Two PCS HG7881 motor controller chip chip chip2. module can drive 2 DC motors simultaneously, or one 4-wire 2-phase stepping motor3. module input voltage: 2.5-12V4. has a continuous current of 800mA per channel output capacity5. PCB size: 29.2 (mm) x23 (mm) Document for Download : Download Package Included:5 x H-bridge Stepper Motor Dual DC...